Equipment used every day
- Blade blocks, spacers and meat stripper plates
- Compatible short knives and small stainless steel utensils
- Mincer plates and knives
- Small sockets, nozzles, hooks and removable parts
TENDER STARMADE IN BELGIUM Back to equipmentCLEANING
Tender Star parts maintenance
CLEANING
WITH ULTRASOUND
Ultrasound reaches the gaps that are difficult to access with manual brushing. Cavitation dislodges residues from submerged surfaces, including complex geometries.
33 and 40 kHz 36 W per litre 10-litre stainless steel tank
10 LTank capacity
360 WUltrasonic power
33 / 40 kHzTwo frequencies
0–80 °CAdjustable heating
1–99 minDigital timer
The principle
Thousands of micro-implosions clean every contour.
Ultrasonic vibrations create tiny bubbles in the bath. As they implode, they produce a cavitation action that dislodges contaminants from the submerged part, including holes, recesses and spaces between blades.
This action complements mechanical cleaning of Tender Star parts and reduces the time spent on hard-to-reach areas. The basket prevents parts from touching the bottom of the tank directly.
BLADE
CavitationMicrobubbles reach the surface and its gaps.
Designed for the workshop — and beyond
One tank, many small parts to clean.
With internal tank dimensions of 300 × 240 × 150 mm, the cleaner is not limited to Tender Star parts. It is suitable for many small items, provided each part fits freely in the basket without stacking, and the bath can circulate all around it.
Small precision parts
- Compatible watch bracelets and jewellery
- Spectacle frames with no incompatible components
- Airbrush nozzles and small precision tools
- Screws, springs and small metal mechanical parts
Four functions
Adapt the action to the part and its residues.
The digital panel lets you select frequency, temperature and duration, with a degassing mode and alternating sweep.
40 kHz · Fullwave
Fine, intensive cleaning suited to complex shapes, recesses and hard-to-reach areas.
33 kHz · Semiwave
A more vigorous action for cleaning surfaces and more stubborn soiling.
Power Sweep
Alternates between 33 and 40 kHz to distribute the action throughout the tank and limit ultrasonic fatigue.
Degas
Intermittent operation that removes dissolved gases from the bath before the cleaning cycle.
A controlled cycle
Prepare, clean, rinse.
A simple sequence to follow in accordance with the operating instructions and the safety data sheet for the product used.
Prepare
Close the valve, fill the tank and maintain a minimum liquid depth of 7 cm.
Arrange
Place the parts in the basket without stacking them, leaving enough space for the bath to circulate.
Set
Select the frequency, duration and temperature. A range of 40 to 60 °C is generally suitable for cleaning.
Rinse
After the cycle, rinse the parts under running water, then dry them in accordance with your hygiene procedure.
Cleaning is not sterilisation
Hygiene remains a complete procedure.
The ultrasonic cleaner removes soiling and facilitates access to complex areas. It does not sterilise. Rinsing, drying and, where required, disinfection must always follow your internal procedure.
- Never operate the tank without liquid.
- Use the basket and do not overload the tank.
- Limit continuous operation to 60 minutes.
- Allow the bath to cool before draining.
Technical data
Compact size, high power.
The dimensions and settings below are taken from the reference operating instructions supplied with model TS-1000PF.
- Model
- TS-1000PF
- Internal tank dimensions
- 300 × 240 × 150 mm
- Overall dimensions
- 330 × 270 × 310 mm
- Capacity
- 10 litres
- Ultrasonic power
- 360 W · 36 W/L
- Heating power
- 400 W
- Frequencies
- 33 / 40 kHz
- Timer
- 1 to 99 minutes
- Temperature
- 0 to 80 °C
- Equipment supplied
- Stainless steel basket, lid, drain filter and cable
Documentation
A clear overview and complete operating instructions.
The two-sided brochure presents the essentials of ultrasonic cleaning. The operating instructions cover installation, safety, controls and maintenance.
Your maintenance
Is the cleaner suitable for your parts ?
Tell us which items you need to clean, their dimensions and the level of soiling. We will help you confirm the appropriate method and product.
Request advice